if (password eq '783-1') {
getURL('http://.../client_pages/.../783.html', '');
}
else {
if (password eq '771-2 Update') {
getURL('http://.../client_pages/.../771.html', '');
}
else {
if (password eq '7990') {
getURL('http://.../client_pages/.../799.html', '');
}
}
ExternalInterface
, fscommand
or getURL
. XML.load
, loadVariables
, LoadVars.load
etc. If a Flash application should not communicate with the browser or needs to make any networking calls, the AllowNetworkingAccess
tag must be set to "none".AllowNetworkingAccess
tag must be set to "none"
. AllowNetworkingAccess
tag should be set to "internal"
. AllowNetworkingAccess
tag must be set to "all"
. services-config.xml
descriptor file specifies a "Logging" XML element to describe various aspects of logging. It looks like the following:
<logging>
<target class="flex.messaging.log.ConsoleTarget" level="Debug">
<properties>
<prefix>[BlazeDS]</prefix>
<includeDate>false</includeDate>
<includeTime>false</includeTime>
<includeLevel>false</includeLevel>
<includeCategory>false</includeCategory>
</properties>
<filters>
<pattern>Endpoint.*</pattern>
<pattern>Service.*</pattern>
<pattern>Configuration</pattern>
</filters>
</target>
</logging>
target
tag takes an optional attribute called level
, which indicates the log level. If the debug level is set to too detailed a level, your application may write sensitive data to the log file.sprintf()
, FormatMessageW()
, or syslog()
.snprintf()
.
int main(int argc, char **argv){
char buf[128];
...
snprintf(buf,128,argv[1]);
}
%x
, than the function takes as arguments to be formatted. (In this example, the function takes no arguments to be formatted.) By using the %n
formatting directive, the attacker may write to the stack, causing snprintf()
to write the number of bytes output thus far to the specified argument (rather than reading a value from the argument, which is the intended behavior). A sophisticated version of this attack will use four staggered writes to completely control the value of a pointer on the stack.
printf("%d %d %1$d %1$d\n", 5, 9);
5 9 5 5
Example 1
.syslog()
function is sometimes used as follows:
...
syslog(LOG_ERR, cmdBuf);
...
syslog()
is a format string, any formatting directives included in cmdBuf
are interpreted as described in Example 1
.syslog()
:
...
syslog(LOG_ERR, "%s", cmdBuf);
...
sprintf()
, FormatMessageW()
, syslog()
, NSLog
, or NSString.stringWithFormat
Example 1: The following code utilizes a command line argument as a format string in NSString.stringWithFormat:
.
int main(int argc, char **argv){
char buf[128];
...
[NSString stringWithFormat:argv[1], argv[2] ];
}
%x
, than the function takes as arguments to be formatted. (In this example, the function takes no arguments to be formatted.)
printf("%d %d %1$d %1$d\n", 5, 9);
5 9 5 5
Example 1
.syslog()
function is sometimes used as follows:
...
syslog(LOG_ERR, cmdBuf);
...
syslog()
is a format string, any formatting directives included in cmdBuf
are interpreted as described in Example 1
.syslog()
:Example 4: Apple core classes provide interesting avenues for exploiting format string vulnerabilities.
...
syslog(LOG_ERR, "%s", cmdBuf);
...
String.stringByAppendingFormat()
function is sometimes used as follows:
...
NSString test = @"Sample Text.";
test = [test stringByAppendingFormat:[MyClass
formatInput:inputControl.text]];
...
stringByAppendingFormat()
:
...
NSString test = @"Sample Text.";
test = [test stringByAppendingFormat:@"%@", [MyClass
formatInput:inputControl.text]];
...
strncpy()
, can cause vulnerabilities when used incorrectly. The combination of memory manipulation and mistaken assumptions about the size or makeup of a piece of data is the root cause of most buffer overflows.
void wrongNumberArgs(char *s, float f, int d) {
char buf[1024];
sprintf(buf, "Wrong number of %.512s");
}
strncpy()
, can cause vulnerabilities when used incorrectly. The combination of memory manipulation and mistaken assumptions about the size or makeup of a piece of data is the root cause of most buffer overflows.f
from a float using a %d
format specifier.
void ArgTypeMismatch(float f, int d, char *s, wchar *ws) {
char buf[1024];
sprintf(buf, "Wrong type of %d", f);
...
}
String arg = request.getParameter("arg");
...
Intent intent = new Intent();
...
intent.setClassName(arg);
ctx.startActivity(intent);
...
Intent
has been detected. Implicit internal intents might expose the system to man-in-the-middle style attacks on internal components.Intent
uses a custom action as defined by an internal component. Implicit intents can facilitate the calling of intents from any given external component without knowledge of the specific component. Combining the two allows for an application to access intents specified for a specific internal use from outside of the desired application context.Intent
from an external application can enable for a wide variety of man-in-the-middle exploits ranging in severity from information leakage and denial of service to remote code execution, depending on the capacity of the internal action specified by the Intent
.Intent
.
...
val imp_internal_intent_action = Intent("INTERNAL_ACTION_HERE")
startActivity(imp_internal_intent_action)
...
PendingIntent
has been detected. Implicit pending intents might result in security vulnerabilities such as denial of service, private and system information leakage, and privilege escalation.Intent
at a later time. Implicit intents facilitate the calling of intents from any given external component, using a general name and filter to determine execution.Intent
is created as a PendingIntent
, this might allow for the Intent
to be sent to an unintended component that runs outside of the intended temporal context, leaving the system vulnerable to exploit vectors such as denial of service, private and system information leakage, and privilege escalation.PendingIntent
.
...
val imp_intent = Intent()
val flag_mut = PendingIntent.FLAG_MUTABLE
val pi_flagmutable_impintintent = PendingIntent.getService(
this,
0,
imp_intent,
flag_mut
)
...
PendingIntent
has been detected that has its flag value set to FLAG_MUTABLE
. Pending intents created with the flag value of FLAG_MUTABLE
are susceptible to having unspecified Intent
fields set downstream, which can modify the capacity of the Intent
and leave the system open to vulnerability.Intent
of a PendingIntent
after its creation can leave a system open to attack. This mostly depends on the overall capability of the underlying Intent
. In most cases, it is best practice to prevent potential issues by setting the PendingIntent
flag to FLAG_IMMUTABLE
.PendingIntent
created with a flag value of FLAG_MUTABLE
.
...
val intent_flag_mut = Intent(Intent.ACTION_GTALK_SERVICE_DISCONNECTED, Uri.EMPTY, this, DownloadService::class.java)
val flag_mut = PendingIntent.FLAG_MUTABLE
val pi_flagmutable = PendingIntent.getService(
this,
0,
intent_flag_mut,
flag_mut
)
...
Intent
from external input to start an activity, start a service, or deliver a broadcast can enable an attacker to arbitrarily launch internal application components, control the behavior of an internal component, or indirectly access protected data from a content provider through temporary permission grants.Intent
nested in the extras bundle of an externally provided Intent
.Intent
to launch a component by calling startActivity
, startService
, or sendBroadcast
.Intent
from an external source and uses that Intent
to start an activity.
...
Intent nextIntent = (Intent) getIntent().getParcelableExtra("next-intent");
startActivity(nextIntent);
...
...
encryptionKey = "".
...
...
var encryptionKey:String = "";
var key:ByteArray = Hex.toArray(Hex.fromString(encryptionKey));
...
var aes.ICipher = Crypto.getCipher("aes-cbc", key, padding);
...
...
char encryptionKey[] = "";
...
...
<cfset encryptionKey = "" />
<cfset encryptedMsg = encrypt(msg, encryptionKey, 'AES', 'Hex') />
...
...
key := []byte("");
block, err := aes.NewCipher(key)
...
...
private static String encryptionKey = "";
byte[] keyBytes = encryptionKey.getBytes();
SecretKeySpec key = new SecretKeySpec(keyBytes, "AES");
Cipher encryptCipher = Cipher.getInstance("AES");
encryptCipher.init(Cipher.ENCRYPT_MODE, key);
...
...
var crypto = require('crypto');
var encryptionKey = "";
var algorithm = 'aes-256-ctr';
var cipher = crypto.createCipher(algorithm, encryptionKey);
...
...
CCCrypt(kCCEncrypt,
kCCAlgorithmAES,
kCCOptionPKCS7Padding,
"",
0,
iv,
plaintext,
sizeof(plaintext),
ciphertext,
sizeof(ciphertext),
&numBytesEncrypted);
...
...
$encryption_key = '';
$filter = new Zend_Filter_Encrypt($encryption_key);
$filter->setVector('myIV');
$encrypted = $filter->filter('text_to_be_encrypted');
print $encrypted;
...
...
from Crypto.Ciphers import AES
cipher = AES.new("", AES.MODE_CFB, iv)
msg = iv + cipher.encrypt(b'Attack at dawn')
...
require 'openssl'
...
dk = OpenSSL::PKCS5::pbkdf2_hmac_sha1(password, salt, 100000, 0) # returns an empty string
...
...
CCCrypt(UInt32(kCCEncrypt),
UInt32(kCCAlgorithmAES128),
UInt32(kCCOptionPKCS7Padding),
"",
0,
iv,
plaintext,
plaintext.length,
ciphertext.mutableBytes,
ciphertext.length,
&numBytesEncrypted)
...
...
Dim encryptionKey As String
Set encryptionKey = ""
Dim AES As New System.Security.Cryptography.RijndaelManaged
On Error GoTo ErrorHandler
AES.Key = System.Text.Encoding.ASCII.GetBytes(encryptionKey)
...
Exit Sub
...
...
DATA: lo_hmac TYPE Ref To cl_abap_hmac,
Input_string type string.
CALL METHOD cl_abap_hmac=>get_instance
EXPORTING
if_algorithm = 'SHA3'
if_key = space
RECEIVING
ro_object = lo_hmac.
" update HMAC with input
lo_hmac->update( if_data = input_string ).
" finalise hmac
lo_digest->final( ).
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
...
using (HMAC hmac = HMAC.Create("HMACSHA512"))
{
string hmacKey = "";
byte[] keyBytes = Encoding.ASCII.GetBytes(hmacKey);
hmac.Key = keyBytes;
...
}
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
import "crypto/hmac"
...
hmac.New(md5.New, []byte(""))
...
Example 1
might run successfully, but anyone who has access to it can determine that it uses an empty HMAC key. After the program ships, there is no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
...
private static String hmacKey = "";
byte[] keyBytes = hmacKey.getBytes();
...
SecretKeySpec key = new SecretKeySpec(keyBytes, "SHA1");
Mac hmac = Mac.getInstance("HmacSHA1");
hmac.init(key);
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
...
let hmacKey = "";
let hmac = crypto.createHmac("SHA256", hmacKey);
hmac.update(data);
...
Example 1
might run successfully, but anyone with access to it might figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function.
...
CCHmac(kCCHmacAlgSHA256, "", 0, plaintext, plaintextLen, &output);
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
import hmac
...
mac = hmac.new("", plaintext).hexdigest()
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
...
digest = OpenSSL::HMAC.digest('sha256', '', data)
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
...
CCHmac(UInt32(kCCHmacAlgSHA256), "", 0, plaintext, plaintextLen, &output)
...
Example 1
may run successfully, but anyone who has access to it will be able to figure out that it uses an empty HMAC key. After the program ships, there is likely no way to change the empty HMAC key unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function. Also, the code in Example 1
is vulnerable to forgery and key recovery attacks.
...
Rfc2898DeriveBytes rdb = new Rfc2898DeriveBytes("", salt,100000);
...
...
var encryptor = new StrongPasswordEncryptor();
var encryptedPassword = encryptor.encryptPassword("");
...
const pbkdfPassword = "";
crypto.pbkdf2(
pbkdfPassword,
salt,
numIterations,
keyLen,
hashAlg,
function (err, derivedKey) { ... }
)
...
CCKeyDerivationPBKDF(kCCPBKDF2,
"",
0,
salt,
saltLen
kCCPRFHmacAlgSHA256,
100000,
derivedKey,
derivedKeyLen);
...
...
CCKeyDerivationPBKDF(kCCPBKDF2,
password,
0,
salt,
saltLen
kCCPRFHmacAlgSHA256,
100000,
derivedKey,
derivedKeyLen);
...
password
contains a strong, appropriately managed password value, passing its length as zero will result in an empty, null
, or otherwise unexpected weak password value.
...
$zip = new ZipArchive();
$zip->open("test.zip", ZipArchive::CREATE);
$zip->setEncryptionIndex(0, ZipArchive::EM_AES_256, "");
...
from hashlib import pbkdf2_hmac
...
dk = pbkdf2_hmac('sha256', '', salt, 100000)
...
...
key = OpenSSL::PKCS5::pbkdf2_hmac('', salt, 100000, 256, 'SHA256')
...
...
CCKeyDerivationPBKDF(CCPBKDFAlgorithm(kCCPBKDF2),
"",
0,
salt,
saltLen,
CCPseudoRandomAlgorithm(kCCPRFHmacAlgSHA256),
100000,
derivedKey,
derivedKeyLen)
...
...
CCKeyDerivationPBKDF(CCPBKDFAlgorithm(kCCPBKDF2),
password,
0,
salt,
saltLen,
CCPseudoRandomAlgorithm(kCCPRFHmacAlgSHA256),
100000,
derivedKey,
derivedKeyLen)
...
password
contains a strong, appropriately managed password value, passing its length as zero will result in an empty, null
, or otherwise unexpected weak password value.
...
encryptionKey = "lakdsljkalkjlksdfkl".
...
...
var encryptionKey:String = "lakdsljkalkjlksdfkl";
var key:ByteArray = Hex.toArray(Hex.fromString(encryptionKey));
...
var aes.ICipher = Crypto.getCipher("aes-cbc", key, padding);
...
...
Blob encKey = Blob.valueOf('YELLOW_SUBMARINE');
Blob encrypted = Crypto.encrypt('AES128', encKey, iv, input);
...
...
using (SymmetricAlgorithm algorithm = SymmetricAlgorithm.Create("AES"))
{
string encryptionKey = "lakdsljkalkjlksdfkl";
byte[] keyBytes = Encoding.ASCII.GetBytes(encryptionKey);
algorithm.Key = keyBytes;
...
}
...
char encryptionKey[] = "lakdsljkalkjlksdfkl";
...
...
<cfset encryptionKey = "lakdsljkalkjlksdfkl" />
<cfset encryptedMsg = encrypt(msg, encryptionKey, 'AES', 'Hex') />
...
...
key := []byte("lakdsljkalkjlksd");
block, err := aes.NewCipher(key)
...
...
private static final String encryptionKey = "lakdsljkalkjlksdfkl";
byte[] keyBytes = encryptionKey.getBytes();
SecretKeySpec key = new SecretKeySpec(keyBytes, "AES");
Cipher encryptCipher = Cipher.getInstance("AES");
encryptCipher.init(Cipher.ENCRYPT_MODE, key);
...
...
var crypto = require('crypto');
var encryptionKey = "lakdsljkalkjlksdfkl";
var algorithm = 'aes-256-ctr';
var cipher = crypto.createCipher(algorithm, encryptionKey);
...
...
{
"username":"scott"
"password":"tiger"
}
...
...
NSString encryptionKey = "lakdsljkalkjlksdfkl";
...
...
$encryption_key = 'hardcoded_encryption_key';
//$filter = new Zend_Filter_Encrypt('hardcoded_encryption_key');
$filter = new Zend_Filter_Encrypt($encryption_key);
$filter->setVector('myIV');
$encrypted = $filter->filter('text_to_be_encrypted');
print $encrypted;
...
...
from Crypto.Ciphers import AES
encryption_key = b'_hardcoded__key_'
cipher = AES.new(encryption_key, AES.MODE_CFB, iv)
msg = iv + cipher.encrypt(b'Attack at dawn')
...
_hardcoded__key_
unless the program is patched. A devious employee with access to this information can use it to compromise data encrypted by the system.
require 'openssl'
...
encryption_key = 'hardcoded_encryption_key'
...
cipher = OpenSSL::Cipher::AES.new(256, 'GCM')
cipher.encrypt
...
cipher.key=encryption_key
...
Example 2: The following code performs AES encryption using a hardcoded encryption key:
...
let encryptionKey = "YELLOW_SUBMARINE"
...
...
CCCrypt(UInt32(kCCEncrypt),
UInt32(kCCAlgorithmAES128),
UInt32(kCCOptionPKCS7Padding),
"YELLOW_SUBMARINE",
16,
iv,
plaintext,
plaintext.length,
ciphertext.mutableBytes,
ciphertext.length,
&numBytesEncrypted)
...
...
-----BEGIN RSA PRIVATE KEY-----
MIICXwIBAAKBgQCtVacMo+w+TFOm0p8MlBWvwXtVRpF28V+o0RNPx5x/1TJTlKEl
...
DiJPJY2LNBQ7jS685mb6650JdvH8uQl6oeJ/aUmq63o2zOw=
-----END RSA PRIVATE KEY-----
...
...
Dim encryptionKey As String
Set encryptionKey = "lakdsljkalkjlksdfkl"
Dim AES As New System.Security.Cryptography.RijndaelManaged
On Error GoTo ErrorHandler
AES.Key = System.Text.Encoding.ASCII.GetBytes(encryptionKey)
...
Exit Sub
...
...
production:
secret_key_base: 0ab25e26286c4fb9f7335947994d83f19861354f19702b7bbb84e85310b287ba3cdc348f1f19c8cdc08a7c6c5ad2c20ad31ecda177d2c74aa2d48ec4a346c40e
...
...
DATA: lo_hmac TYPE Ref To cl_abap_hmac,
Input_string type string.
CALL METHOD cl_abap_hmac=>get_instance
EXPORTING
if_algorithm = 'SHA3'
if_key = 'secret_key'
RECEIVING
ro_object = lo_hmac.
" update HMAC with input
lo_hmac->update( if_data = input_string ).
" finalise hmac
lo_digest->final( ).
...
...
using (HMAC hmac = HMAC.Create("HMACSHA512"))
{
string hmacKey = "lakdsljkalkjlksdfkl";
byte[] keyBytes = Encoding.ASCII.GetBytes(hmacKey);
hmac.Key = keyBytes;
...
}
import "crypto/hmac"
...
hmac.New(sha256.New, []byte("secret"))
...
...
private static String hmacKey = "lakdsljkalkjlksdfkl";
byte[] keyBytes = hmacKey.getBytes();
...
SecretKeySpec key = new SecretKeySpec(keyBytes, "SHA1");
Mac hmac = Mac.getInstance("HmacSHA1");
hmac.init(key);
...
const hmacKey = "a secret";
const hmac = createHmac('sha256', hmacKey);
hmac.update(data);
...
hmacKey
unless the program is patched. A devious employee with access to this information could use it to compromise the HMAC function.
...
CCHmac(kCCHmacAlgSHA256, "secret", 6, plaintext, plaintextLen, &output);
...
import hmac
...
mac = hmac.new("secret", plaintext).hexdigest()
...
...
digest = OpenSSL::HMAC.digest('sha256', 'secret_key', data)
...
...
CCHmac(UInt32(kCCHmacAlgSHA256), "secret", 6, plaintext, plaintextLen, &output)
...
...
Rfc2898DeriveBytes rdb = new Rfc2898DeriveBytes("password", salt,100000);
...
...
var encryptor = new StrongPasswordEncryptor();
var encryptedPassword = encryptor.encryptPassword("password");
...
const pbkdfPassword = "a secret";
crypto.pbkdf2(
pbkdfPassword,
salt,
numIterations,
keyLen,
hashAlg,
function (err, derivedKey) { ... }
)
...
CCKeyDerivationPBKDF(kCCPBKDF2,
"secret",
6,
salt,
saltLen
kCCPRFHmacAlgSHA256,
100000,
derivedKey,
derivedKeyLen);
...
...
$zip = new ZipArchive();
$zip->open("test.zip", ZipArchive::CREATE);
$zip->setEncryptionIndex(0, ZipArchive::EM_AES_256, "hardcodedpassword");
...
from hashlib import pbkdf2_hmac
...
dk = pbkdf2_hmac('sha256', 'password', salt, 100000)
...
...
key = OpenSSL::PKCS5::pbkdf2_hmac('password', salt, 100000, 256, 'SHA256')
...
...
CCKeyDerivationPBKDF(CCPBKDFAlgorithm(kCCPBKDF2),
"secret",
6,
salt,
saltLen,
CCPseudoRandomAlgorithm(kCCPRFHmacAlgSHA256),
100000,
derivedKey,
derivedKeyLen)
...